M306V5EESP Mitsubishi, M306V5EESP Datasheet - Page 99

• Manufacturer Part Number: M306V5EESP
• Description: SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
• Manufacturer: Mitsubishi

Rev. 1.0
Table 2.11.3 Specifications of clock synchronous serial I/O mode (2)
Notes 1: “n” denotes the value 00
Select function
2: If an overrun error occurs, the UARTi receive buffer will have the next data written in. Note also
that the UARTi receive interrupt request bit is not set to “1”.
Item
• CLK polarity selection
• LSB first/MSB first selection
• Continuous receive mode selection
• Switching serial data logic (UART2)
• TxD, RxD I/O polarity reverse (UART2)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
Whether transmit data is output/input at the rising edge or falling edge of the
transfer clock can be selected
Whether transmission/reception begins with bit 0 or bit 7 can be selected
Reception is enabled simultaneously by a read from the receive buffer register
Whether to reverse data in writing to the transmission buffer register or
reading the reception buffer register can be selected.
This function is reversing TxD port output and RxD port input. All I/O data
level is reversed.
16
to FF
16
that is set to the UART bit rate generator.
Specification
and ON-SCREEN DISPLAY CONTROLLER
MITSUBISHI MICROCOMPUTERS
M306V5ME-XXXSP
M306V5EESP
99