M306V5EESP Mitsubishi, M306V5EESP Datasheet - Page 174

• Manufacturer Part Number: M306V5EESP
• Description: SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
• Manufacturer: Mitsubishi

174
Figure 2.16.8 Display position
2.16.2 Display Position
The display positions of characters are specified by a block. There are 16 blocks, blocks 1 to 16. Up to 32
characters (32-character mode)/42 characters (42-character mode)/ can be displayed in each block (re-
fer to 2.16.6 Memory for OSD).
The display position of each block can be set in both horizontal and vertical directions by software.
The display position in the horizontal direction can be selected for all blocks in common from 256-step
display positions in units of 4 T
The display position in the vertical direction for each block can be selected from 1024-step display posi-
tions in units of 1 T
Blocks are displayed in conformance with the following rules:
• When the display position is overlapped with another block in the dame layer (Figure 2.16.8 (b)), a lower
• When another block display position appears while one block is displayed in the dame layer (Figure
block number (1 to 16) is displayed on the front.
2.16.8 (c)), the block with a larger set value as the vertical display start position is displayed. However,
do not display block with the dot size of 2T
In the case of OSDS/P mode block: 20 dots in vertical from the vertical display start position.
In the case of OSDL mode block: 32 dots in vertical from the vertical display start position.
In the case of CC or CDOSD mode block: 26 dots in vertical from the vertical display start position.
Note: VPi (i = 1 to 16) indicates the vertical display start position of display block i.
H
(a) Example when each block is separated
(b) Example when block 2 overlaps with block 1
(c) Example when block 2 overlaps in process of block 1
( T
H
= H
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
SYNC
OSC
VP1 = VP2
HP
HP
HP
cycle).
(T
OSC
VP1
VP2
VP3
VP1
VP2
= OSD oscillation cycle).
C
2H or 3T
C
3H during display period ( ) of another block.
Block 1
Block 2
Block 3
Block 1
Block 1
Block 2
(Block 2 is not displayed)
and ON-SCREEN DISPLAY CONTROLLER
MITSUBISHI MICROCOMPUTERS
M306V5ME-XXXSP
M306V5EESP
Rev. 1.0