XC2234N INFINEON [Infineon Technologies AG], XC2234N Datasheet - Page 39

• Manufacturer Part Number: XC2234N
• Description: 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance XC2000 Family / Value Line
• Manufacturer: INFINEON [Infineon Technologies AG]

Table 9
Compare Modes
Mode 2
Mode 3
Double Register
Mode
Single Event Mode
When a capture/compare register has been selected for capture mode, the current
contents of the allocated timer will be latched (‘captured’) into the capture/compare
register in response to an external event at the port pin associated with this register. In
addition, a specific interrupt request for this capture/compare register is generated.
Either a positive, a negative, or both a positive and a negative external signal transition
at the pin can be selected as the triggering event.
The contents of all registers selected for one of the five compare modes are continuously
compared with the contents of the allocated timers.
When a match occurs between the timer value and the value in a capture/compare
register, specific actions will be taken based on the compare mode selected.
Data Sheet
Compare Modes (cont’d)
Function
Interrupt-only compare mode;
Only one compare interrupt per timer period is generated
Pin set ‘1’ on match; pin reset ‘0’ on compare timer overflow;
Only one compare event per timer period is generated
Two registers operate on one pin;
Pin toggles on each compare match;
Several compare events per timer period are possible
Generates single edges or pulses;
Can be used with any compare mode
XC2232N, XC2234N, XC2236N, XC2238N
39
XC2000 Family / Value Line
Functional Description
V1.3, 2010-04