WIZ610wi WIZnet, WIZ610wi Datasheet - Page 23

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

2.2.5. Wireless Setting
2.2.5.1. Mode Selection
You can select one of Access Point, Gateway and Client for the wireless connection mode.
Figure 12. Operation Mode
Access Point is the default mode. If you select Gateway or Client and click the “Setup”
button, the progress bar will be shown.
Figure 13. Changing Operation Mode
1) Access Point Mode
In this mode, all Ethernet ports and wireless interface are bridged together and NAT
function is disabled. All the WAN related function and firewall are not supported.
2) Gateway Mode
In this mode, your device can connect to the internet via ADSL/Cable Modem. The NAT is
enabled and PCs in LAN ports share the same IP to ISP through WAN port. WAN
connection type can be setup in WAN page by using PPPOE, DHCP client, PPTP client or
static IP.
3) Client Mode
In this mode, your device act as a client. If you configure PC or application device as DHCP
client, Access Point will be the DCHP Server and WIZ610wi doesn’t act as DHCP Server.
15