WIZ610wi WIZnet, WIZ610wi Datasheet - Page 34

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

DNS information can be automatically acquired from a DHCP server or
set manually (Set DNS Manually).
Figure 26. WAN Access Type – DHCP Client
PPTP
Virtual Server: Virtual Server also known as Port Forwarding associates
a port number with a private IP address(internal network). This
technique allows clients from outside a network to access devices within
the LAN (internal network).
DMZ: This feature allows one network user to be exposed to the
Internet for special-purposes such as Internet gaming or
videoconferencing. DMZ hosting forwards all the ports at the same time
to one PC. The Port Range Forward enhances the security of your device
because only a range of ports are opened for access. DHCP should be
disabled in order to avoid any changes in your IP address. Static IP
address is recommended when using the DMZ
Remote Management : Configure the port number for the connection
to WIZ610wi from a remote site. Default Port Number is set as “8080”.
URL Filter: It enables to connect or disconnect to the specified URL.
MAC Filter: Prevent access from a device with a specific MAC address
IP Filter: Prevent acess from a device with a specific IP address
DDNS(Dynamic DNS) : Once the DDNS server registers yours MAC
address, your device can connect to the internet regardless of your
address. DDNS service can be provided by www.no-ip.com. (You need to
pay some fee). After registering some information at www.no-ip.com,
input your E-mail address and password in the figure shown below.
When you click the “Update” button, the status will change from“Not
Connected” to “Connected”
26