WIZ610wi WIZnet, WIZ610wi Datasheet - Page 67

• Manufacturer Part Number: WIZ610wi
• Description: WiFi / 802.11 Modules 802.11B/G WIFI MOD
• Manufacturer: WIZnet

Specifications of WIZ610wi

• Rohs: yes
• Protocol Supported: 802.11 b/g
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: Ethernet, UART
• Transmit Power (max): 16 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 5 V
• Supply Current Transmitting: 480 mA
• Supply Current Receiving: 480 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 39 mm x 32 mm x 4.7 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: DSSS, OFDM
• Security: AES, WEP, WPA, WPA2

RZ
WZ
CC
CS
Get
Set
Set
Get
Get insert
tag
Set insert tag
Change
Client Mode
Connection
2: Transmit serial data to the aux port
If module is rebooted or any configuration value is changed,
it returns to default.
* Response Syntax
<S>
* Command Syntax
<RZ>
* Response Syntax
<Sx_xxx_xxx>
Enable(0-1)[_String1_String2]
0: disable, default value, String can be omitted.
1: enable
String1, String2: It is available when Enable is set as “1”.
String1 is the string which is added when transmitted from
main port to serial. String2 is the string which is added
when transmitted from aux port to serial. It is composed of
maximum 16 characters
* Command Syntax
<WZx_xxx_xxx>
Enable(0-1)[_String1_String2]
0: disable, default value, String can be omitted.
1: enable
String1, String2: It is available when Enable is set as “1”.
String1 is the string which is added when transmitted from
main port to serial. String2 is the string which is added
when transmitted from aux port to serial. It is composed of
maximum 16 characters.
* Response Syntax
<S>
* Command Syntax
<CCxxx.xxx.xxx.xxx_xxxxx>
TCP Server IP address_port (0~65535)
Change main port mode to TCP client mode.
* Response Syntax
<S>
* Command Syntax
59
1
1
1
1