BTS5682E Infineon Technologies, BTS5682E Datasheet - Page 25
BTS5682E
Manufacturer Part Number
BTS5682E
Description
IC LED DRIVER DSO-36
Manufacturer
Infineon Technologies
Specifications of BTS5682E
Topology
PWM, Switched Capacitor (Charge Pump)
Number Of Outputs
6
Internal Driver
Yes
Type - Primary
Automotive
Frequency
2MHz
Voltage - Supply
3.8 V ~ 5.5 V
Mounting Type
Surface Mount
Package / Case
DSO-36
Internal Switch(s)
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Voltage - Output
-
Operating Temperature
-
Current - Output / Channel
-
Efficiency
-
Lead Free Status / Rohs Status
Details
Other names
SP000296428
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
7.4
In addition to the output clamp for inductive loads as described in
available for over voltage protection. The current through the ground connection has to be limited during over
voltage. Please note that in case of over voltage the pin GND might have a high voltage offset to the module
ground.
7.5
In case of complete loss of the device ground connections, but connected load ground, the SPOC - BTS5682E
securely changes to or stays in off-state excepted channel 5. If switched on before, channel 5 will remain in on-
state until
7.6
In case of loss of
ground connection or through an additional path from
reverse polarity reason, the ground connection is not available for demagnetization. Then for example, a resistor
can be placed in parallel to the diode or a suppressor diode can be used between
Data Sheet
V
BB
Over Voltage Protection
Loss of Ground
Loss of
-
V
DD
V
BB
>
V
connection in on-state, all inductances of the loads have to be demagnetized through the
V
BD
BB
.
V
25
BB
to ground. When a diode is used in the ground path for
Section
6.3, there is a clamp mechanism
V
BB
and GND.
SPOC - BTS5682E
Protection Functions
Rev. 1.0, 2008-01-22