TDA21106 Infineon Technologies, TDA21106 Datasheet - Page 7

• Manufacturer Part Number: TDA21106
• Description: IC DRIVER DUAL HS MOSFET PDSO-8
• Manufacturer: Infineon Technologies
• Series: CoreControl™r
• Type: High Side/Low Sider

Specifications of TDA21106

• Configuration: High and Low Side, Synchronous
• Input Type: PWM
• Delay Time: 20ns
• Current - Peak: 4A
• Number Of Configurations: 1
• Number Of Outputs: 2
• High Side Voltage - Max (bootstrap): 30V
• Voltage - Supply: 10.8 V ~ 13.2 V
• Operating Temperature: -25°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: DSO-8
• Rise Time: 33 ns
• Fall Time: 25 ns
• Supply Voltage (min): 10.8 V
• Supply Current: 8 mA
• Maximum Power Dissipation: 800 mW
• Maximum Operating Temperature: + 150 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 25 C
• Number Of Drivers: 2
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: SP000014573; SP000063695; TDA21106T

CoreControl
TM
Data Sheet
TDA21106
Published by
Infineon Technologies AG,
Bereichs Kommunikation
St.-Martin-Strasse 53,
D-81541 München
 Infineon Technologies AG 1999
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your
nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives
worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the
express written approval of Infineon Technologies, if a failure of such components can reasonably be
expected to cause the failure of that life-support device or system, or to affect the safety or
effectiveness of that device or system Life support devices or systems are intended to be implanted in
the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
Rev 2.0
Page 7
Apr, 2004