BTS6133D Infineon Technologies, BTS6133D Datasheet - Page 17

• Manufacturer Part Number: BTS6133D
• Description: IC HIGH SIDE PWR SWITCH DPAK-5
• Manufacturer: Infineon Technologies
• Series: PROFET®r
• Type: High Sider

Specifications of BTS6133D

• Input Type: Non-Inverting
• Number Of Outputs: 1
• On-state Resistance: 8 mOhm
• Current - Output / Channel: 41A
• Current - Peak Output: 75A
• Voltage - Supply: 5.5 V ~ 38 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: DPak, TO-252 (4 leads + tab)
• Power Load Switch Type: High Side
• Input Voltage: 38V
• On Resistance Rds(on): 0.01ohm
• Thermal Protection: ESD
• Power Dissipation Pd: 59W
• No. Of Outputs: 1
• Internal Switch: No
• Distribution Switch: RoHS Compliant
• Current Limit: 75A
• On State Resistance: 0.01ohm
• Rohs Compliant: Yes
• Distribution Switch Case Style: P-TO252-5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: BTS6133D; BTS6133DT; BTS6133DTR; BTS6133DXT; SP000014006; SP000274948

Edition 2007-02
Published by
Infineon Technologies AG
81726 Munich, Germany
© Infineon Technologies AG 2007.
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical
values stated herein and/or any information regarding the application of the device, Infineon Technologies
hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-
infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the
failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted in the human body, or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other
persons may be endangered.