DM330023 Microchip Technology, DM330023 Datasheet - Page 30

• Manufacturer Part Number: DM330023
• Description: BOARD DEV DSPICDEM MCHV
• Manufacturer: Microchip Technology
• Series: dsPICDEM™r

Specifications of DM330023

• Main Purpose: Power Management, Motor Control
• Embedded: Yes, Other
• Utilized Ic / Part: dsPIC33F
• Primary Attributes: AC Induction (ACIM) Motors, Brushless DC (BLDC) Motors, Permanent Magnet Synchronous (PMSM) Motors
• Secondary Attributes: Power Factor Corrected (PFC)
• Processor To Be Evaluated: dsPICDEM
• Processor Series: dsPIC DSC
• Interface Type: RS-232, USB
• Operating Supply Voltage: 90 V to 265 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

dsPICDEM™ MCHV Development System User’s Guide
DS70605A-page 24
Once code is halted, hovering over a variables opens a tool tip window that contains
the current value of the variable.
2.4.4.2.3
To use a Watch window:
1. The Watch window is made visible on the desktop by selecting View>Watch. It
2. Select an SFR or Symbol from the list and click the related Add button to add it
A Watch window populated with an SFRs and Symbols will look like Figure 2-9. For
more on using Watch windows, see MPLAB IDE Help.
FIGURE 2-9:
2.4.5
When the program is successfully debugged and running, the next step is to program
the device for stand-alone operation in the finished design. When doing this, the
resources reserved for debug are released for use by the application. To program the
application, use the following steps:
1. Disable Starter Kits as a debug tool by selecting Debugger>Select Tool>None.
2. Select Starter Kits as the programmer in the Programmer>Select Programmer
3. Select Programmer>Program.
At this point, the application code will run independently.
Note:
contains four selectable Watch views (via tabs) in which to view variables (SFRs,
symbols and absolute addresses).
to the Watch window. Or click in the “Address” column and enter an absolute
address.
menu.
Programming an Application
This feature must be configured. Select Edit>Properties and click the
Tooltips tab, and select the “Enable Variable Mouseover Values” check
box.
Using Watch Windows
WATCH WINDOW EXAMPLE
 2009 Microchip Technology Inc.