M30850T3-CPE Renesas Electronics America, M30850T3-CPE Datasheet - Page 21

• Manufacturer Part Number: M30850T3-CPE
• Description: EMULATOR FOR M32C/80,84,85,86,8A
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30850T3-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M32C/80, M32C/84, M32C/85, M32C/86, M32C/8A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M30850T3-CPE User’s Manual
1.3 Specifications
Table 1.5 lists specifications of the M30850T3-CPE.
Table 1.5 M30850T3-CPE specifications
*1: This is applicable when connecting to the emulation memory converter board, the R0E330850MSRC0 not included.
*2: The relationship between the voltage and the maximum operating frequency of this product is shown in Figures 1.4 to 1.7. These
*3: Available to connect the host machine that supports USB 2.0. With the USB interface, not all hardware (such as host machine, USB
REJ10J1430-0300 Rev.3.00 Aug. 17, 2009
Applicable MCUs
Evaluation MCU
Usable mode
Maximum operating frequency
Applicable power supply
Basic debugging functions
Real-time trace function
Real-time RAM monitor function
Hardware break function
Execution time measurement function
Connection to user system
(see “2.8 Connecting the User System”
on page 32)
Power supply for emulator
Host machine interface
precautions only need to be observed when using an emulator, and does not apply for the actual MCU.
devices, USB hub) combination will work and guaranteed.
*2
M32C/80, 84, 85, 86 and 8A Groups
M30855FHGP (ROM size: 512 KB + 4 KB, RAM size: 24 KB)
Single-chip mode, Memory expansion mode, Microprocessor mode
Single-power supply
Dual-power supply
User system connected
(JP1=EXT)
User system not connected
(JP1=INT)
- Download
- Software break (max. 64 points)
- Program execution/stop (allows free-run execution supporting software breaks)
- Memory reference/setting (reference/setting C-variables, run-time execution)
- Register reference/setting
- Disassemble display
- C-level debugging, etc.
- 64K-cycle bus information recordable
- 5 trace modes supported (Break/Before/About/After/Full)
- Can be recorded ON/OFF by events
- 1,024 bytes (256 bytes x4)
- Data/last access result
2 points (Address match, bus match, max. 255 pass counts)
Time between program start and stop
For 144-pin 0.5mm pitch LQFP
(PLQP0144KA-A,
Previous code: 144P6Q-A)
For 100-pin 0.5mm pitch LQFP
(PLQP0100KB-A,
Previous code: 100P6Q-A)
For 100-pin 0.65mm pitch QFP
(PRQP0100JB-A,
Previous code: 100P6S-A)
100-pin LCC socket
DC 5.0 V ± 5 % / 2 A externally supplied
(Prepare a power supply which complies with CE marking requirements separately.)
USB (USB 1.1 full-speed
(24-bit address, 16-bit data, 12-bit MCU status)
*3
, mini-B standard connector)
VCC1 = VCC2 = 4.2 to 5.5 V: 32 MHz
VCC1 = VCC2 = 3.0 to 5.5 V: 24 MHz
VCC1 = 5.0 V ± 0.2 V and 3.3 V ≤ VCC2 ≤ VCC1: 32 MHz
VCC1 = 5.0 V ± 0.2 V and 3.0 V ≤ VCC2 ≤ VCC1: 24 MHz
3.0 to 5.5 V
3.3 V or 5.0 V
(supplied from the emulator, set by JP2)
M3T-FLX-144NSD (not included)
M3T-F160-100NSD (not included)
(1) M3T-F160-100NRB (not included)
(2) M30800T-PTC (not included) +
(3) M30800T-PTC (not included) +
M30800T-PTC (not included) +
IC61-1004-051 (not included)
M3T-100LCC-DMS (not included) +
M3T-DUMMY100S (not included)
M3T-100LCC-DMS (not included) +
M3T-DIRECT100S (not included)
*1
Page 19 of 102
1. Outline