R0E0200F0EMU00 Renesas Electronics America, R0E0200F0EMU00 Datasheet - Page 304

• Manufacturer Part Number: R0E0200F0EMU00
• Description: EMULATOR E200 MAIN BODY-SH7780
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In-Circuit Emulatorr

Specifications of R0E0200F0EMU00

• Contents: Emulator Board, Cables, Software and Documentation
• For Use With/related Products: SH7780
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.11
The emulator acquires code coverage information (C0 coverage) from the address range specified
by the user and displays the results.
Notes: 1. The information on the executed delay slot cannot be acquired.
5.11.1
Select [View -> Code -> Code Coverage…] or click the [Code Coverage] toolbar button (
following dialog box opens when the coverage function is used for the first time after initiation of
the emulator.
278
2. Be sure to set the following when using the code coverage function:
3. In this function, the data that is output by AUD trace is used. Accordingly, when the
Acquiring Code Coverage
Opening the [Code Coverage] Window
• [Acquisition] dialog box that is opened by selecting [Set] from the popup menu of
• Ch12 of the [Eventpoint] window:
These settings above are default when the emulator is activated.
emulator is used in realtime trace mode, the trace data may be lost and the code
coverage information will not be collected normally. In such a case, it is recommended
to use the emulator in non-realtime trace mode.
By default, the emulator is activated in realtime trace mode.
the [Trace] window:
Figure 5.104 [Coverage Acquisition Range Setting] Dialog Box
[Trace type]: Select [AUD Trace].
[Trace Extend Mode]: Uncheck the [Trace data with PPC] check box.
[Branch event] sheet: check all the branch conditions.
[Action] sheet: Check [Acquire trace].
). The