R0E0200F0EMU00 Renesas Electronics America, R0E0200F0EMU00 Datasheet - Page 376

• Manufacturer Part Number: R0E0200F0EMU00
• Description: EMULATOR E200 MAIN BODY-SH7780
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In-Circuit Emulatorr

Specifications of R0E0200F0EMU00

• Contents: Emulator Board, Cables, Software and Documentation
• For Use With/related Products: SH7780
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

[Trace type]:
[Trace Mode 1]:
[Trace mode 2]:
[User memory area]:
[Trace Extend Mode]: Sets whether or not internal performance counter Ch3 or Ch4 is included
Note: The items that can be set in this window differ according to the product. For details on the
• Set the start and end addresses, which are in the memory range that outputs the trace result, in
• Enter the addresses depending on your environment. Do not specify the range that the
350
the [Start] and [End] edit boxes of [User memory area], respectively.
program has been downloaded to, as the memory contents are overwritten by the trace output
result.
[AUD trace]
[Internal trace]
[User Memory trace]
[Realtime trace]
[Non realtime trace]
[Trace continue]
[Trace stop]
[Start Address]
[End Address]
[Trace data with PPC]
settings for each product, refer to the online help.
Selects the type of trace function.
Selects the operation mode when the trace information has been
Specifies the operation when the trace buffer becomes full.
sequentially generated.
Sets the trace display range when the user-memory output trace function is
used.
as the item for trace acquisition.
Selects the AUD trace function.
Selects the internal trace function.
Selects the user-memory output trace function.
Some trace information will not be output.
The CPU stops operations until the trace information is output.
The oldest trace information is overwritten to acquire the latest
trace information.
When the trace buffer becomes full, the trace information is no
longer acquired.
Specifies the start address of the display range.
Specifies the end address of the display range.
When checked, internal performance counter Ch3 or Ch4 is
included.