HS7046EPH60H Renesas Electronics America, HS7046EPH60H Datasheet - Page 133

• Manufacturer Part Number: HS7046EPH60H
• Description: DEV EMULATOR BASE SH7046
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: Microcontrollerr

Specifications of HS7046EPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: SH7046
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

[Address]:
[Data]: Sets data conditions.
[Bus/Area]:
[Don’t Care]:
[Address]:
[Range]:
[Outside Range]:
[…]:
[Don’t Care]:
[Value]:
[Use mask]:
[Except this value]:
[Access Size]:
[Position]:
[Access type]:
[Bus State]:
[Area]:
Sets address conditions. It is also possible to specify a label as the address value.
Sets access type, bus status, and read/write cycle conditions.
[Long]:
[Word]:
[Byte]:
[On chip ROM]: Selects the on-chip ROM area as the condition.
[On chip RAM]: Selects the on-chip RAM area as the condition.
[On chip I/O]:
Selects no address bus condition.
Select this button to set the address bus value specified in [Start] as the break
condition.
A break occurs in the range of the address bus values specified from [Start]
(start address) to [End] (end address).
Select this option to generate a break with an address bus outside the range
set in [Range].
The address range of a function can be set by [Start] and [End]. For details,
refer to section 5.10, Input Format.
Selects no data bus condition.
Sets a data bus value.
Sets mask conditions. Set the mask bits if [Use mask] is selected. Masked
bits satisfy this break condition regardless of their values.
Sets a value other than that has been specified as the data bus condition.
Selects the data-access size.
Sets a data bus value as a number. The position of the valid data bus is
specified.
Sets access type conditions. When [Don’t Care] has been selected, no access
type condition can be set.
Sets bus status conditions. When [Don’t Care] has been selected, no bus
status condition can be set.
Sets area conditions. When [Don’t Care] has been selected, no area condition
can be set.
None
4n: Upper word
4n + 2: Lower word
4n: Upper byte of the upper word
4n + 1: Lower byte of the upper word
4n + 2: Upper byte of the lower word
4n + 3: Lower byte of the lower word
Selects the on-chip I/O area as the condition.
45