HS7046EPH60H Renesas Electronics America, HS7046EPH60H Datasheet - Page 75

• Manufacturer Part Number: HS7046EPH60H
• Description: DEV EMULATOR BASE SH7046
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: Microcontrollerr

Specifications of HS7046EPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: SH7046
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3.5.7
The A/D converter has AVcc, AVss, Avref, and _ADTRG pins as well as the analog input pins. As the A/D
converter operates with an independent power supply, connect AVcc (the power supply pin) to the A/D power
supply on the user system.
Notes: 1. When not using the A/D converter, connect AVcc to Vcc.
3.5.8
Some on-chip modules do not operate when the emulator is in break mode. Table 3.7 shows the relation between
the emulator’s state and operation of the on-chip modules.
Table 3.7 Emulator State and Operation of On-Chip Modules
On-Chip Module
WDT (watchdog timer)
MTU (multi-function timer pulse unit)
MMT (motor management unit)
CMT (compare-match timer)
SCI (serial communication interface)
DTC (data transfer controller)
HCAN2
UBC (user break controller)
AUD (advanced user debugger)
I/O port
A/D converter
H-UDI (user debugging interface)
Notes: 1.
2.
2. As the user system interface cable, printed circuit boards, and protective circuits are connected
A/D Converter
Emulator State and On-Chip Modules
between the MCU and the user system in the emulator pod, the conversion precision is lower than
that of the SH7046 series or SH7144 series MCUs. At final debugging of the user system using the
A/D converter, use the actual SH7046 series or SH7144 series (F-ZTAT microcomputer) MCUs.
If a break occurs during a DTC cycle (vector read, read/write of transferred information, or data
read/write), the DTC continues operation until the DTC cycle is complete. The DTC resumes
operation after it returns to emulation.
Not supported by the emulator.
Operation During
Emulation Halted
(Break)
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Not available
*1
*2
Operation During
Emulation
(Execution or Step
Execution)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Not available
*2
53