HS7046EPH60H Renesas Electronics America, HS7046EPH60H Datasheet - Page 134

• Manufacturer Part Number: HS7046EPH60H
• Description: DEV EMULATOR BASE SH7046
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: Microcontrollerr

Specifications of HS7046EPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: SH7046
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

[Probe]:
[Interrupt]:
[Count]:
3.7.4
Handlings for settings other than software breakpoints, on-chip breakpoints, and on-emulator breakpoints are
common.
3.7.5
Select an event point to be modified, and choose [Edit...] from the popup menu to open the dialog box that
corresponds the event, which allows the user to modify the event conditions. The [Edit...] menu is only available
when one event point is selected.
3.7.6
Select an event point and choose [Enable] from the popup menu to enable the selected event point.
3.7.7
Select an event point and choose [Disable] from the popup menu to disable the selected event point. When an
event point is disabled, the event point will remain in the list, but an event will not occur when the specified
conditions have been satisfied.
3.7.8
Select an event point and choose [Delete] from the popup menu to remove the selected event point. To retain the
event point but not have it cause an event when its conditions are met, use the [Disable] option (see section
3.15.7, Disabling an Event Point).
46
[Read/Write]:
Editing Event Points
Modifying Event Points
Enabling an Event Point
Disabling an Event Point
Deleting an Event Point
Sets the levels (high or low) of the external probe signals (PRB1 to PRB4) as the condition.
When [Don’t Care] has been selected, the level of the selected probe signal cannot be set as the
condition.
Sets the levels (high or low) of the IRQ and NMI signals as the condition. When [Don’t Care]
has been selected, the level of the IRQ or NMI signal cannot be set as the condition.
Sets a satisfaction count condition. When [Don’t Care] has been selected, the satisfaction count
is defined as 1.
[External]:
[Emulator]:
Sets read/write conditions. When [Don’t Care] has been selected, no
read/write condition can be set.
Selects an external area where no emulation memory is allocated as
the condition.
Selects an external area where emulation memory is allocated as the
condition.