HS7046EPH60H Renesas Electronics America, HS7046EPH60H Datasheet - Page 83

• Manufacturer Part Number: HS7046EPH60H
• Description: DEV EMULATOR BASE SH7046
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: Microcontrollerr

Specifications of HS7046EPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: SH7046
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

The following messages are displayed during the test. There are 14 steps in this test (when a PCI interface board
is used, the time for the test will be about three minutes).
Message
Loading driver ....................OK (Use PCI)
Initializing driver .......................OK
Searching for interface card ..............OK
Checking emulator is connected ............OK
Emulator board information:
Normal started at Wed Jan 22 09:43:43 2003
******* NORMAL TEST - Press 'Q' to stop *******
1. Main Board Access
2. Emulation Board Access
E6000H SH7046 Emulator Tests Vx.x.xx.xxx
Main board ID:
01) Registers Initial Value Check .............................OK
02) Registers Write/Verify ....................................OK
03) DPRAM Address Decode Test .................................SKIP
04) DPRAM Marching Test .......................................SKIP
05) Trace Memory Address Decode Test ..........................OK
06) Trace Memory Marching Test ................................OK
07) G/A Registers Initial Value Check .........................OK
08) G/A Registers Write/Verify ................................OK
01) Registers Initial Value Check .............................OK
02) Registers Write/Verify ....................................OK
03) H-UDI Interface Registers Initial Value Check .............OK
04) H-UDI Interface Registers Write/Verify ....................OK
05) MAPR Interface Registers Initial Value Check ..............OK
06) MAPR Interface Registers Write/Verify .....................OK
07) PRALR Interface Registers Initial Value Check .............OK
08) PRALR Interface Registers Write/Verify ....................OK
H'0
Emulation board ID:
Test program start message. x.x
shows the version number.
Shows that the PC interface
board is correctly installed in
the host computer.
Shows that the E6000H
emulator is correctly connected
to the host computer.
Shows the ID number of the
E6000H emulator.
Shows the time when the
diagnostic program has started.
(COUNT=0001)
Description
H'002
61