HS7046EPH60H Renesas Electronics America, HS7046EPH60H Datasheet - Page 82

• Manufacturer Part Number: HS7046EPH60H
• Description: DEV EMULATOR BASE SH7046
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: Microcontrollerr

Specifications of HS7046EPH60H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: SH7046
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4.3
Insert the CD-R (HS7046EPH60SR supplied with the E6000H) into the CD-ROM drive of the host computer,
move the current directory to <Drive>:\Diag with a command prompt, and enter one of the following commands
according to the PC interface board used to initiate the diagnostic program:
1. PCI bus interface board (HS6000EIC01H or HS6000EIC02H)
2. PC card interface (HS6000EIP01H)
3. LAN adapter (HS6000ELN01H)
4. USB adapter (HS6000EIU01H or HS6000EIU02H)
The High-performance Embedded Workshop must be installed before the test program is executed.
Be sure to initiate the diagnostic program from <Drive>:\Diag. Do not initiate it from a directory other than
<Drive>:\Diag, such as > <Drive>:\Diag\TM7046
current directory is not <Drive>:\Diag, the diagnostic program will not operate correctly.
When
executed. To stop the execution, enter Q.
Notes: 1.
60
> TM7046
> TM7046
> TM7046
> TM7046
–
S is added to the command line such as > TM7046
2.
Diagnostic Test Procedure Using the Diagnostic Program
Do not remove the CD-R from the CD-ROM drive during test program execution.
<Drive> is a drive name for the CD-ROM drive.
–
–
–
–
PCI (RET)
PCCD (RET)
ELN (RET)
USB (RET)
–
PCI (RET). If the diagnostic program is initiated when the
–
PCI
–
S (RET), steps 1 to 14 will be repeatedly