PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 126

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
6.3
written by using the commands explained in this section.
6.3.1
from this menu and press the ENTER button; the FP5 will then execute the command for the target device, based on the
settings downloaded to the valid programming area. For details on command execution, refer to 4.3.3 [Device] menu.
[Commands
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
In standalone mode, the programming environment of the target device can be checked and then programs can be
The [Commands] menu provides various commands required for programming the target device. Select a command
Main Menu
Standalone Operation Menu
[Commands] menu
>]
[E.P.
[Program
[Erase
[Verify
[Set Security
[Checksum
Submenu
>] Pressing the ENTER button executes the [Autoprocedure(E.P.)] command.
>] Pressing the ENTER button executes the [Program] command.
>] Pressing the ENTER button executes the [Erase] command.
>] Pressing the ENTER button executes the [Verify] command.
>] Pressing the ENTER button executes the [Set Security] command.
>] Pressing the ENTER button executes the [Checksum] command. The checksum
Table 6-1. [Commands] Menu (1/2)
value read from the target device is displayed in the message display.
<Display example>
Or, the cross referencing results will be displayed if the FP5 Manager [Checksum
comparison] is enabled.
<Display example>
Checksum: 623E
Compare: PASS
The following will be displayed when a PR5 file that supports data flash is
downloaded.
<Display example>
Code Flash sum:
xxxx -> Enter
Click the ENTER button.
Data Flash sum:
yyyy -> Enter
Click the ENTER button.
Total sum:
zzzz -> Enter
Click the ENTER button.
Check sum:
Compare: PASS
Checksum: 623E
CHAPTER 6 USAGE IN STANDALONE MODE
Description
Page 126 of 240