PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 137

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
8.1
communications software. In this chapter, we shall describe how to use HyperTerminal which is a part of Windows to
establish communications.
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
This chapter describes how to use communications commands from a host machine to operate the FP5.
In order to use communications commands for operation, communications with the FP5 must be established with
(1) Connecting the system
(2) Start the FP5
Starting the Communications Software
Connect a serial cable to the serial port on your host machine, and then connect the other end to the serial
connector on the FP5. Next, plug the AC adapter into an outlet, then connect it to the FP5 power supply connector.
After the connections are made, press the FP5 POWER button to turn the power on. If the unit starts correctly,
the POWER LED will light, and “Commands >” will be displayed on the message display.
If the unit does not come on in the manner described above, then there may be a malfunction in the FP5, so please
contact our sales representative or distributor.
CHAPTER 8 USAGE COMMUNICATION COMMANDS
Host machine
Figure 8-1. System Connections
Serial cable
CHAPTER 8 USAGE COMMUNICATION COMMANDS
FP5
AC adapter
Outlet
Page 137 of 240