PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 72

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
(6) [Set Security] command
(7) [Checksum] command
Figure 4-41. Program Data Save Dialog Box <When Write Motorola SREC file Command Is Executed>
Clicking the Open button saves the program data into a file and closes the dialog box.
Clicking the Cancel button closes the program data save dialog box without saving the program data into a file.
(c) <4> [Set Security command options] area.
The [Checksum] command reads the checksum calculated in the target device and displays it in the action log
window.
checksum of the program file and compares both.
Remark
The checksum is calculated as follows.
<When using 78K0, 78K0S (other than 78K0S/Kx1+ microcontrollers and
Method:
Range:
The [Set Security] command sets the security functions for the target device.
executed, the settings made in the [Set Security command options] area on the [Advanced] tab in the Device
Setup dialog box will be reflected in the target device. For details on the security functions, refer to 4.3.3 (14)
When using a 78K0S/Kx1+ microcontroller or the
Subtraction (16-bit arithmetic)
Area set in the [Operation Mode] area on the [Standard] tab in the Device Setup dialog box
The checksum read by this command differs from the one displayed in the [File checksum] area in the
programmer parameter window.
[Checksum...] command.
For details on the [File checksum] area, refer to 4.3.1 (3)
CHAPTER 4 PROGRAMMING GUI USAGE
μ
PD78F9334, this command also displays the
μ
PD78F9334), 78K0R, or V850>
When this command is
Page 72 of 240