PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 41

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
4.1
installed. For the installation method, refer to CHAPTER 3 SOFTWARE INSTALLATION.
4.2
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
This chapter explains functional details on windows and dialog boxes of the programming GUI.
Make sure that the programming GUI, USB driver, and the FP5 parameter file (PR5 file) for the target device are
(1) System connection
(2) FP5 startup
Introduction
Startup of Programming GUI
Connect a USB cable (or serial cable) to the USB port (or serial port) on the host machine, and the other side of the
cable to the USB connector (or serial connector) on the FP5. Plug in the AC adapter and then connect to the FP5
power supply connector.
After the cables are connected, press the POWER button on the FP5. When the FP5 is correctly started, the
POWER LED is turned on and “Commands >” is displayed in the message display. If not, the cause may be a
defect in the FP5, so consult a Renesas Electronics sales representative or distributor.
Host
machine
CHAPTER 4 PROGRAMMING GUI USAGE
Figure 4-1. System Connection
Serial cable
USB cable
or
CHAPTER 4 PROGRAMMING GUI USAGE
FP5
AC adapter
Outlet
Page 41 of 240