863 B&K Precision, 863 Datasheet - Page 104

• Manufacturer Part Number: 863
• Description: PROGRAMMER SER EPROM +150MCNTRLR
• Manufacturer: B&K Precision
• Type: Universalr

Specifications of 863

• Contents: Programmer, Adapter, Cable, Manual and Software
• For Use With/related Products: Serial EEPROM and Microchip PICmicro Microcontrollers
• Other names: BK863

Device / Select EPROM /Flash by ID
EPROM’s and Flash with 28 and 32 pins. Any of programmers
determines pins number automatically. For other programmers
you must enter this number manually.
on the socket. This is necessary to enable the system to read
the device ID. Do not insert into the socket a device that is not
an EPROM or Flash. It may be damaged when the programmer
applies the high voltage.
EPROM types, because most of them ID not supports.
device number in a search box (use a key <Space> as a
separation character) and press <Enter> or click OK button.
Press a key <Esc> or click Cancel button at any time to cancel
device selection without affecting the currently selected device.
Selected device is automatically saved to buffer of default
devices (max. 10 devices). This buffer is accessible with
Device / Select from default devices command.
If you wish display additional information about the current
device, use an <Ctrl+F1> key. This command provides a size
of device, organization, programming algorithm and a list of
programmers (including auxiliary modules), which supported
this device. You can find here a package information and other
general information about current device too.
Use this command for auto select an EPROM or Flash as
active device by reading the device ID. The programmer can
automatically identify certain devices by the reading the
manufacturer and the device-ID that are burnt into the chip.
This only applies to EPROM or Flash that supports this feature.
If the device does not support a chip ID and manufacturer's ID,
a message will be displayed indicating this as an unknown or
not supported device.
If more devices with identical chip ID and manufacturer's ID
were detected, the list of these devices will be displayed. A
corresponding device can be choosen from this list by
selecting its number (or manufacturer name) from list and
press <Enter> (or click OK button). Press a key <Esc> or click
Cancel button at any time to cancel device selection without
affecting the currently selected device.
WARNING: The control program only support this time
The programmer applies a high voltage to the appropriate pins
We don't recommend apply this command to 2764 and 27128
104