863 B&K Precision, 863 Datasheet - Page 110

• Manufacturer Part Number: 863
• Description: PROGRAMMER SER EPROM +150MCNTRLR
• Manufacturer: B&K Precision
• Type: Universalr

Specifications of 863

• Contents: Programmer, Adapter, Cable, Manual and Software
• For Use With/related Products: Serial EEPROM and Microchip PICmicro Microcontrollers
• Other names: BK863

Device / Device options / Statistics
Statistics gives the information about actual count of device
operations, which were proceeded on selected type device. If
one device is corresponding to one device operation, e.g.
programming, the number of device operations will be equal to
number of programmed devices.
The next function of statistics is Count down. Count down
allows checking the number of device operations, and then
number of devices, on which device operations have to be
done. After each successful device operation the value of
‘;’ - the semicolon character means the beginning of a
Note:
• Label names can contain all characters except ‘[‘ and ‘]’.
• All address and byte number values in input file are
• Allowed address value size is from 1 to 4 bytes.
• Allowed size of data arrays in one line is in range from 1
• Be careful to set correct addresses. Address must be
Example:
[nav1] A7890 78 89 56 02 AB CD ; comment1
[nav2] A7890 02 02 04 06 08 0A
[nav3] A7890 08 09 0A 0B A0 C0 ; comment2
[nav4] A7890 68 87 50 02 0B 8D
[nav5] A7890 A8 88 59 02 AB 7D
;next line contains also second definition
[nav6] A7890 18 29 36 42 5B 6D , FFFF6 44 11 22 33 99
88 77 66 55 16
; this is last line - end of file
In the example file six serial values with labels „nav1“,
„nav2“, ...“nav6“ are defined. Each value is written to buffer
on address $A7890. All values have size 6 bytes. The line
with „nav6“ label has also second value definition, which is
written to buffer on address $FFFF6 and has size 10 bytes,
i.e. the last byte of this value will be written to address
$FFFFF.
The label names are analyzed as non case sensitive, i.e.
character ‘a’ is same as ‘A’, ‘b’ is same as ‘B’ etc..
hexadecimal.
to 64 bytes. When there are two data arrays in one line,
the sum of their size in bytes can be maximally 80 bytes.
defined inside device start and device end address
range. In case of address out of range, warning window
appears and serialization is set to disabled (None).
comment. All characters from „;„ to the end of line are
ignored. Comment can be on individual line or in the
end of definition line.
110