863 B&K Precision, 863 Datasheet - Page 105

• Manufacturer Part Number: 863
• Description: PROGRAMMER SER EPROM +150MCNTRLR
• Manufacturer: B&K Precision
• Type: Universalr

Specifications of 863

• Contents: Programmer, Adapter, Cable, Manual and Software
• For Use With/related Products: Serial EEPROM and Microchip PICmicro Microcontrollers
• Other names: BK863

Device / Device options
Device / Device options / Operation options
Device / Device options / Serialization
All settings of this menu are used for programming process,
serialization and associated file control.
All settings of this command are used for programming
process control. This is a flexible environment which content
items associated with current device and programmer type.
Items, which are valid for the current device but aren't
supported by current programmer, are disabled. These settings
are saving to disk along with associated device by File / Exit
and save command.
List of items:
- group Addresses:
- group Insertion test:
- group Command execution:
Serialization is special mode of program. When a serialization
mode is activated, a specified value is automatically inserted
on predefined address into buffer before programming each
device. When more devices are programmed one by one, the
serial number value is changed for each device automatically
and inserted into buffer before programming device, so each
device has unique serial number.
There are two types of serialization:
If a new device is selected, the serialization function is set to a
default state i.e. disabled.
•
•
device start address
device end address
buffer start address
insertion test
check ID bytes
blank check before programming (default DISABLE)
erase before programming
verify after reading
verify after programming
verify options (nominal VCC 5%, nominal VCC 10%,
Incremental mode
From file mode
VCCmin VCCmax)
105
(default 0)
(default device size-1)
(default 0)
(default ENABLE)
(default ENABLE)
(ONCE, TWICE)
(default DISABLE)
(default ENABLE)
Software