863 B&K Precision, 863 Datasheet - Page 124

• Manufacturer Part Number: 863
• Description: PROGRAMMER SER EPROM +150MCNTRLR
• Manufacturer: B&K Precision
• Type: Universalr

Specifications of 863

• Contents: Programmer, Adapter, Cable, Manual and Software
• For Use With/related Products: Serial EEPROM and Microchip PICmicro Microcontrollers
• Other names: BK863

Options / Module options
Options / Automatic YES!
settings are saved to configuration file by command Options /
Save options or when control program is closed.
Handler is not available for sale.
This command is used for setting Automatic YES! mode. In
this mode you just put a device into ZIF socket and a last
operation
automatically detects an insertion of a new device and runs
last executed operation without pressing any key or button. An
insertion of device into ZIF is displayed on the screen.
Repeated operation executing will be cancelled by pressing
key <Esc> during waiting for insert/remove a device to/from
ZIF.
Note: During waiting for an insertion a new device into ZIF
socket, the LED BUSY on the programmer is blinking.
This mode may be enabled or disabled by item Automatic
YES! mode. If a new programmer is selected Options / Find
programmer, this mode will be disabled.
In Response time is possible to set a time interval within must
be detected device in ZIF socket to accept an insertion of a
new device. Default is set standard interval. If socket adapter
is used then is recommended to set an elongated interval.
In Pins with capacitors bar may be entered a list of a pins
interconnected by capacitors (for example: if a converter,
which have connected capacitor between VCC and GND, is
used), which may makes problems at detecting insertion of a
new device.
List of pins of device is in form:
Example: 4,6,17
This list is erased if a new device is selected by Device /
Select default or Device / Select device ...
This option is used for multiple socket programmers for
defining MASTER socket and activity of each socket.
MASTER socket group box allows user to set socket which is
preferentially
Enable/Disable socket checkbox array allows user to set
enabling and disabling of each socket individually. Disabled
sockets are ignored for any device operation.
pinA, pinB, pinC....
will
used
be
repeated
for
124
device
automatically.
reading
operation.
Program