DSPIC33FJ64MC204-I/ML Microchip Technology, DSPIC33FJ64MC204-I/ML Datasheet - Page 321

• Manufacturer Part Number: DSPIC33FJ64MC204-I/ML
• Description: IC DSPIC MCU/DSP 64K 44-QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64MC204-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 44-QFN
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 35
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 9x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Data Ram Size: 8 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFNDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

28.0
The dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/
X04 and dsPIC33FJ128MCX02/X04 devices include
the following features intended to maximize application
flexibility and reliability, and minimize cost through
elimination of external components:
• Flexible configuration
• Watchdog Timer (WDT)
• Code Protection and CodeGuard™ Security
• JTAG Boundary Scan Interface
• In-Circuit Serial Programming™ (ICSP™)
• In-Circuit emulation
TABLE 28-1:
© 2009 Microchip Technology Inc.
0xF80000 FBS
0xF80002 FSS
0xF80004 FGS
0xF80006 FOSCSEL
0xF80008 FOSC
0xF8000A FWDT
0xF8000C FPOR
0xF8000E FICD
0xF80010 FUID0
0xF80012 FUID1
0xF80014 FUID2
0xF80016 FUID3
Legend: — = unimplemented bit, read as ‘0’.
Note 1:
Address
Note 1: This data sheet summarizes the features
2:
2: Some registers and associated bits
SPECIAL FEATURES
This Configuration register is not available and reads as 0xFF on dsPIC33FJ32MC302/304 devices.
These bits are reserved for use by development tools and must be programmed as ‘1’.
of
dsPIC33FJ64MCX02/X04
dsPIC33FJ128MCX02/X04
devices. However, it is not intended to be
a comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F/PIC24H
Family Reference Manual”. Please see
the
(www.microchip.com)
dsPIC33F/PIC24H
Manual sections.
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
Name
(1)
DEVICE CONFIGURATION REGISTER MAP
the
Microchip
FWDTEN WINDIS
PWMPIN
dsPIC33FJ32MC302/304,
IESO
Bit 7
FCKSM<1:0>
—
Reserved
RBS<1:0>
RSS<1:0>
Family
for
web
HPOL
Bit 6
(2)
—
—
the
family
Reference
latest
IOL1WAY
and
site
JTAGEN
Preliminary
LPOL
of
Bit 5
—
—
—
—
—
User Unit ID Byte 0
User Unit ID Byte 1
User Unit ID Byte 2
User Unit ID Byte 3
WDTPRE
28.1
The Configuration bits can be programmed (read as
‘0’), or left unprogrammed (read as ‘1’), to select
various device configurations. These bits are mapped
starting at program memory location 0xF80000.
The individual Configuration bit descriptions for the
Configuration registers are shown in Table 28-2.
Note that address 0xF80000 is beyond the user program
memory space. It belongs to the configuration memory
space (0x800000-0xFFFFFF), which can only be
accessed using table reads and table writes.
To prevent inadvertent configuration changes during
code execution, all programmable Configuration bits
are write-once. After a bit is initially programmed during
a power cycle, it cannot be written to again. Changing
a device configuration requires that power to the device
be cycled.
The Device Configuration register map is shown in
Table 28-1.
ALTI2C
Bit 4
—
—
—
—
—
Configuration Bits
—
Bit 3
—
—
—
—
BSS<2:0>
SSS<2:0>
OSCIOFNC POSCMD<1:0>
WDTPOST<3:0>
Bit 2
—
GSS<1:0>
FNOSC<2:0>
FPWRT<2:0>
DS70291D-page 321
Bit 1
ICS<1:0>
GWRP
BWRP
SWRP
Bit 0