DSPIC33FJ64MC204-I/ML Microchip Technology, DSPIC33FJ64MC204-I/ML Datasheet - Page 409

• Manufacturer Part Number: DSPIC33FJ64MC204-I/ML
• Description: IC DSPIC MCU/DSP 64K 44-QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64MC204-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 44-QFN
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 35
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 9x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Data Ram Size: 8 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFNDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

APPENDIX A:
Revision A (August 2007)
Initial release of this document.
Revision B (March 2008)
This revision includes minor typographical and
formatting changes throughout the data sheet text. In
addition, redundant information was removed that is
now available in the respective chapters of the
“dsPIC33F/PIC24H Family Reference Manual”, which
can
(www.microchip.com).
The major changes are referenced by their respective
section in the following table.
TABLE A-1:
© 2009 Microchip Technology Inc.
“High-Performance, 16-bit Digital Signal
Controllers”
Section 1.0 “Device Overview”
Section 3.0 “Memory Organization”
Section 6.0 “Interrupt Controller”
Section 7.0 “Direct Memory Access (DMA)”
Section 8.0 “Oscillator Configuration”
Section 21.0 “10-bit/12-bit Analog-to-Digital
Converter (ADC1)”
Section 27.0 “Special Features”
be
obtained
Section Name
MAJOR SECTION UPDATES
from
REVISION HISTORY
the
Microchip
website
Note 1 added to all pin diagrams (see “Pin Diagrams”)
Add External Interrupts column and Note 4 to the
“dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 and
dsPIC33FJ128MCX02/X04 Controller Families” table
Updated parameters PMA0, PMA1 and PMD0 through PMPD7
(Table 1-1)
Updated FAEN bits in Table 4-8
IFS0-IFSO4 changed to IFS
IEC0-IEC4 changed to IEC
IPC0-IPC19 changed to IPCx (see Section 6.3.4 “IPCx”)
Updated parameter PMP (see Table 8-1)
Updated the third clock source item (External Clock) in
Section 8.1.1 “System Clock Sources”
Updated TUN<5:0> (OSCTUN<5:0>) bit description (see
Register 8-4)
Added Note 2 to Figure 21-3
Added Note 2 to Figure 27-1
Added parameter FICD in Table 27-1
Added parameters BKBUG, COE, JTAGEN and ICS in Table 27-2
Added Note after second paragraph in Section 27.2 “On-Chip
Voltage Regulator”
Preliminary
Update Description
X
X
(see Section 6.3.3 “IECx”)
(see Section 6.3.2 “IFSx”)
DS70291D-page 409