MC908JB8JDWE Freescale Semiconductor, MC908JB8JDWE Datasheet - Page 218

• Manufacturer Part Number: MC908JB8JDWE
• Description: IC MCU 8K FLASH 3MHZ 20-SOIC
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908JB8JDWE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 3MHz
• Connectivity: USB
• Peripherals: LVD, POR, PWM
• Number Of I /o: 13
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: HC08JB
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: USB
• Maximum Clock Frequency: 3 MHz
• Number Of Programmable I/os: 37
• Number Of Timers: 2
• Operating Supply Voltage: 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, DEMO908GZ60E, M68EML08GZE, KITUSBSPIDGLEVME, KITUSBSPIEVME, KIT33810EKEVME
• Minimum Operating Temperature: 0 C
• Controller Family/series: HC08
• No. Of I/o's: 13
• Ram Memory Size: 256Byte
• Cpu Speed: 8MHz
• No. Of Timers: 1
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Input/Output Ports (I/O)
Technical Data
218
NOTE:
PTE4P — Pin PTE4 Pullup Enable
When the USB module is enabled, the pullup controlled by PTE4P is
disconnected; PTE4/D– pin functions as D– which has a 1.5kΩ
programmable pullup resistor. (See
PTE3P — Pin PTE3 Pullup Enable
PCP — Port C Pullup Enable
PBP — Port B Pullup Enable
PAP — Port A Pullup Enable
This read/write bit controls the pullup option for the PTE4 pin when the
pin is configured as an input and the USB module is disabled.
This read/write bit controls the pullup option for the PTE3 pin when the
pin is configured as an input and the USB module is disabled.
This read/write bit controls the pullup option for the PTC7–PTC0 pins.
When set, a pullup device is connected when a pin is configured as
an input.
This read/write bit controls the pullup option for the PTB7–PTB0 pins.
When set, a pullup device is connected when a pin is configured as
an input.
This read/write bit controls the pullup option for the PTA7–PTA0 pins.
When set, a pullup device is connected when a pin is configured as
an input.
1 = Configure PTE4 to have internal pullup to V
0 = Disconnect PTE4 internal pullup
1 = Configure PTE3 to have internal pullup to V
0 = Disconnect PTE3 internal pullup
1 = Configure port C to have internal pullups to V
0 = Disconnect port C internal pullups
1 = Configure port B to have internal pullups to V
0 = Disconnect port B internal pullups
1 = Configure port A to have internal pullups to V
0 = Disconnect port A internal pullups
Input/Output Ports (I/O)
MC68HC908JB8•MC68HC08JB8•MC68HC08JT8 — Rev. 2.3
9.8.8 USB Control Register
Freescale Semiconductor
DD
DD
REG
REG
REG
3.)