MC9S12C128CFUE Freescale Semiconductor, MC9S12C128CFUE Datasheet - Page 461

• Manufacturer Part Number: MC9S12C128CFUE
• Description: IC MCU 128K FLASH 25MHZ 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12C128CFUE

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Cpu Family: HCS12
• Device Core Size: 16b
• Frequency (max): 25MHz
• Interface Type: CAN/SCI/SPI
• Total Internal Ram Size: 4KB
• # I/os (max): 60
• Number Of Timers - General Purpose: 8
• Operating Supply Voltage (typ): 2.5/5V
• Operating Supply Voltage (max): 2.75/5.5V
• Operating Supply Voltage (min): 2.35/2.97V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 80
• Package Type: PQFP
• Processor Series: S12C
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 4000 B
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 61
• Number Of Timers: 1
• Operating Supply Voltage: - 0.3 V to + 6.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: M68EVB912C32EE
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Compliant

15.4.6
Setting the PAMOD bit configures the pulse accumulator for gated time accumulation operation. An active
level on the PACNT input pin enables a divided-by-64 clock to drive the pulse accumulator. The PEDGE
bit selects low levels or high levels to enable the divided-by-64 clock.
The trailing edge of the active level at the IOC7 pin sets the PAIF. The PAI bit enables the PAIF flag to
generate interrupt requests.
The pulse accumulator counter register reflect the number of pulses from the divided-by-64 clock since the
last reset.
15.5
The reset state of each individual bit is listed within
which details the registers and their bit fields.
15.6
This section describes interrupts originated by the TIM16B8CV1 block.
generated by the TIM16B8CV1 to communicate with the MCU.
The TIM16B8CV1 uses a total of 11 interrupt vectors. The interrupt vector offsets and interrupt numbers
are chip dependent.
15.6.1
This active high outputs will be asserted by the module to request a timer channel 7 – 0 interrupt to be
serviced by the system controller.
Freescale Semiconductor
1. Chip Dependent.
Interrupt
C[7:0]F
PAOVF
PAOVI
TOF
Resets
Interrupts
Gated Time Accumulation Mode
Channel [7:0] Interrupt (C[7:0]F)
The timer prescaler generates the divided-by-64 clock. If the timer is not
active, there is no divided-by-64 clock.
Offset
(1)
—
—
—
—
Vector
—
—
—
—
1
Table 15-23. TIM16B8CV1 Interrupts
Priority
MC9S12C-Family / MC9S12GC-Family
—
—
—
—
1
Timer Channel 7–0
Pulse Accumulator
Pulse Accumulator
Timer Overflow
Rev 01.24
NOTE
Section 15.3, “Memory Map and Register Definition”
Overflow
Source
Input
Chapter 15 Timer Module (TIM16B8CV1) Block Description
Active high pulse accumulator input interrupt
Active high timer channel interrupts 7–0
Pulse accumulator overflow interrupt
Table 15-23
Timer Overflow interrupt
Description
lists the interrupts
461