ST7FLITEU05M3TR STMicroelectronics, ST7FLITEU05M3TR Datasheet - Page 65

• Manufacturer Part Number: ST7FLITEU05M3TR
• Description: IC MCU 8BIT 2K FLASH 8SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITEU05M3TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 5
• Program Memory Size: 2KB (2K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-SOIC (3.9mm Width)
• Processor Series: ST7FLITEUx
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: ICC
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 2
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FUS-PRIMER, ST7FLITE-SK/RAIS, ST7FLITU0-D/RAIS, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

ST7LITEU05 ST7LITEU09
Caution:
10.2.4
Caution:
Table 21.
1. When the I/O port is in input configuration and the associated alternate function is enabled as an output,
2. When the I/O port is in output configuration and the associated alternate function is enabled as an input,
The alternate function must not be activated as long as the pin is configured as input with
interrupt, in order to avoid generating spurious interrupts.
Analog alternate function
When the pin is used as an ADC input, the I/O must be configured as floating input. The
analog multiplexer (controlled by the ADC registers) switches the analog voltage present on
the selected pin to the common analog rail which is connected to the ADC input.
It is recommended not to change the voltage level or loading on any port pin while
conversion is in progress. Furthermore it is recommended not to have clocking pins located
close to a selected analog pin.
The analog input voltage level must be within the limits stated in the absolute maximum
ratings.
reading the DR register will read the alternate function output status.
the alternate function reads the pin status given by the DR register content.
I/O port configurations
PAD
PAD
PAD
V
V
V
DD
R
DD
DD
R
R
PU
PU
PU
PULL-UP
CONDITION
Hardware configuration
INTERRUPT
CONDITION
OTHER
FROM
PINS
ALTERNATE
ALTERNATE
REGISTER
ENABLE
ENABLE
DR
DR REGISTER ACCESS
SELECTION
REGISTER
REGISTER
POLARITY
DR
DR
DR REGISTER ACCESS
DR REGISTER ACCESS
W
R
ALTERNATE
ALTERNATE
OUTPUT
OUTPUT
ALTERNATE INPUT
EXTERNAL INTERRUPT
SOURCE (ei
ANALOG INPUT
R/W
R/W
DATA BUS
DATA BUS
DATA BUS
x
)
I/O ports
65/139