MC9S08QG84CFFER Freescale Semiconductor, MC9S08QG84CFFER Datasheet - Page 235

• Manufacturer Part Number: MC9S08QG84CFFER
• Description: IC MCU 8BIT 8K FLASH 16-QFN
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08QG84CFFER

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 12
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 16-QFN
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 20 MHz
• Data Ram Size: 512 B
• On-chip Adc: Yes
• Number Of Programmable I/os: 12
• Number Of Timers: 1
• Mounting Style: SMD/SMT
• Height: 1 mm
• Interface Type: I2C, SCI, SPI
• Length: 5 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 1.8 V
• Width: 5 mm
• For Use With: DEMO9S08QG8E - BOARD DEMO FOR MC9S08QG8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

16.3.2
The two read-only TPM counter registers contain the high and low bytes of the value in the TPM counter.
Reading either byte (TPMCNTH or TPMCNTL) latches the contents of both bytes into a buffer where they
remain latched until the other byte is read. This allows coherent 16-bit reads in either order. The coherency
mechanism is automatically restarted by an MCU reset, a write of any value to TPMCNTH or TPMCNTL,
or any write to the timer status/control register (TPMSC).
Reset clears the TPM counter registers.
Freescale Semiconductor
Reset
W
R
Bit 15
Timer Counter Registers (TPMCNTH:TPMCNTL)
1
2
0
7
The maximum frequency that is allowed as an external clock is one-fourth of the bus
frequency.
If the external clock input is shared with channel n and is selected as the TPM clock source,
the corresponding ELSnB:ELSnA control bits should be set to 0:0 so channel n does not try
to use the same pin for a conflicting function.
CLKSB:CLKSA
PS2:PS1:PS0
0:0
0:1
1:0
1:1
14
0
6
0:0:0
0:0:1
0:1:0
0:1:1
1:0:0
1:0:1
1:1:0
1:1:1
Figure 16-4. Timer Counter Register High (TPMCNTH)
MC9S08QG8 and MC9S08QG4 Data Sheet, Rev. 5
Table 16-2. TPM Clock Source Selection
Table 16-3. Prescale Divisor Selection
Any write to TPMCNTH clears the 16-bit counter.
13
0
5
TPM Clock Source to Prescaler Input
12
No clock selected (TPM disabled)
0
4
External source (TPMCLK)
Fixed system clock (XCLK)
Bus rate clock (BUSCLK)
TPM Clock Source Divided-By
11
3
0
128
16
32
64
1
2
4
8
Timer/Pulse-Width Modulator (S08TPMV2)
10
1,2
0
2
9
0
1
Bit 8
0
0
233