UPD78F0386GK-8EU-A Renesas Electronics America, UPD78F0386GK-8EU-A Datasheet - Page 159

• Manufacturer Part Number: UPD78F0386GK-8EU-A
• Description: MCU 96KB FLASH 5KB RAM
• Manufacturer: Renesas Electronics America
• Series: 78K0/Lx2r

Specifications of UPD78F0386GK-8EU-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LCD, LVD, POR, PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

(4) 16-bit timer capture/compare register 001 (CR001)
(5) 16-bit timer capture/compare register 011 (CR011)
CR001 is a 16-bit compare register.
CR001 can be set by a 16-bit memory manipulation instruction.
Reset signal generation sets this register to 0000H.
Note
The value set in CR001 is constantly compared with 16-bit timer counter 01 (TM01) count value, and an interrupt
request (INTTM001) is generated if they match. The set value is held until CR001 is rewritten.
Cautions 1. If CR001 is cleared to 0000H in the free-running mode, an interrupt request (INTTM001) is
CR011 is a 16-bit compare register.
CR011 can be set by a 16-bit memory manipulation instruction.
Reset signal generation sets this register to 0000H.
Note
The value set in the CR011 is constantly compared with 16-bit timer counter 01 (TM01) count value, and an
interrupt request (INTTM011) is generated if they match. The set value is held until CR011 is rewritten.
Cautions 1. If the CR011 register is cleared to 0000H, an interrupt request (INTTM011) is generated when
Address: FFB2H, FFB3H
Symbol
Address: FFB4H, FFB5H
Symbol
CR001
CR011
PD78F0374, 78F0375, 78F0376, 78F0376D, 78F0384, 78F0385, 78F0386, and 78F0386D only.
PD78F0374, 78F0375, 78F0376, 78F0376D, 78F0384, 78F0385, 78F0386, and 78F0386D only.
2. CR011 can be rewritten during TM01 operation. For details, see Caution 2 in Figure 6-20.
2. Do not rewrite CR001 during TM01 operation.
3. CR001 cannot be used as a capture register.
3. CR011 cannot be used as a capture register.
generated when the value of CR001 changes from 0000H to 0001H following TM01 overflow
(FFFFH).
the value of CR011 changes from 0000H to 0001H following TM01 overflow (FFFFH).
Figure 6-6. Format of 16-Bit Timer Capture/Compare Register 001 (CR001)
Figure 6-7. Format of 16-Bit Timer Capture/Compare Register 011 (CR011)
CHAPTER 6 16-BIT TIMER/EVENT COUNTERS 00 AND 01
FFB3H
FFB5H
After reset: 0000H
After reset: 0000H
User’s Manual U17504EJ2V0UD
Note
Note
R/W
R/W
FFB2H
FFB4H
157