UPD78F0386GK-8EU-A Renesas Electronics America, UPD78F0386GK-8EU-A Datasheet - Page 163

• Manufacturer Part Number: UPD78F0386GK-8EU-A
• Description: MCU 96KB FLASH 5KB RAM
• Manufacturer: Renesas Electronics America
• Series: 78K0/Lx2r

Specifications of UPD78F0386GK-8EU-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LCD, LVD, POR, PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

(2) Capture/compare control register 00 (CRC00)
(3) 16-bit timer output control register 00 (TOC00)
Note The capture operation is not performed if both the rising and falling edges are specified as the valid edge of
Cautions 1. Timer operation must be stopped before setting CRC00.
This register controls the operation of the 16-bit timer capture/compare registers (CR000, CR010).
CRC00 can be set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation clears CRC00 to 00H.
This register controls the operation of the 16-bit timer/event counter 00 output controller. It sets/resets the timer
output F/F (LV00), enables/disables output inversion and 16-bit timer/event counter 00 timer output,
enables/disables the one-shot pulse output operation, and sets the one-shot pulse output trigger via software.
TOC00 can be set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation clears TOC00 to 00H.
Address: FFBCH
Symbol
CRC00
the TI000 pin.
2. When the mode in which clear & start occurs on a match between TM00 and CR000 is
3. To ensure that the capture operation is performed properly, the capture trigger requires a
selected with 16-bit timer mode control register 00 (TMC00), CR000 should not be specified
as a capture register.
pulse two cycles longer than the count clock selected by prescaler mode register 00 (PRM00).
CRC002
CRC001
CRC000
Figure 6-10. Format of Capture/Compare Control Register 00 (CRC00)
7
0
0
1
0
1
0
1
After reset: 00H
CHAPTER 6 16-BIT TIMER/EVENT COUNTERS 00 AND 01
Operates as compare register
Operates as capture register
Captures on valid edge of TI010 pin
Captures on valid edge of TI000 pin by reverse phase
Operates as compare register
Operates as capture register
6
0
R/W
User’s Manual U17504EJ2V0UD
5
0
CR010 operating mode selection
CR000 operating mode selection
CR000 capture trigger selection
4
0
3
0
Note
CRC002
2
CRC001
1
CRC000
0
161