T48C862M-R3-TNS Atmel, T48C862M-R3-TNS Datasheet - Page 86

• Manufacturer Part Number: T48C862M-R3-TNS
• Description: IC MON TIRE PRESS 315MHZ 24SOIC
• Manufacturer: Atmel

Specifications of T48C862M-R3-TNS

• Frequency: 315MHz
• Modulation Or Protocol: FM, FSK
• Data Rate - Maximum: 32 kBaud
• Power - Output: 10dBm
• Current - Transmitting: 9.5mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Memory Size: 1KB EEPROM, 1KB RAM
• Voltage - Supply: 2 V ~ 4 V
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 24-SOIC (0.200", 5.30mm Width)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Applications: -

Combination Mode 10:
Frequency Measurement or
Event Counter with Time Gate
Combination Mode 11:
Burst Modulation 1
86
T48C862-R3
Counter 3
Timer 2 mode 1/2:
Timer 2 output mode 1/6: Timer 2 compare match toggles (TOG2) to the Timer 3
Timer 3 mode 3:
(with Timer 2
The counter is driven by an external (T3I) clock source. The output signal (TOG2) of
Timer 2 resets the counter. The counter value before reset is saved in the capture regis-
ter. If single-action mode is activated for one or both compare registers, the trigger
signal restarts also the single actions. This mode can be used for frequency measure-
ments or as event counter with time gate.
Figure 85. Frequency Measurement
Figure 86. Event Counter with Time Gate
Timer 2 mode 1/2:
Timer 2 output mode 1/6: Timer 2 compare match toggles the output flip-flop (M2)
Timer 3 mode 6:
The Timer 3 counter is driven by an internal or external clock source. Its compare and
compare mode registers must be programmed to generate the carrier frequency with
the output toggle flip-flop. The output toggle flip-flop (M2) of Timer 2 is used to enable
and disable the Timer 3 output. The Timer 2 can be driven by the toggle output signal of
Timer 3 (TOG3) or any other clock source.
Register
T3CP-
TOG2
Counter 3
T3R
T3I
Register
T3CP-
TOG2
T3R
T3I
0 0 1 2 3 4 5 6 7 8 9 10
0 0 1 2 3 4 5 6 7 8 9 10
Capture value = 0
Capture value = 0
12-bit compare counter/8-bit compare counter and
4-bit prescaler
Timer/Counter; internal trigger restart and internal capture
TOG2-signal)
12-bit compare counter/8-bit compare counter and
4-bit prescaler
to the Timer 3
Carrier frequency burst modulation controlled by Timer 2
output (M2)
11121314151617
11
0
1 2 3 4 5 6 7 8 9 101112131415161718
0 1
Capture value = 17
2
Capture value = 11
3
Capt. value = 18
4554A–4BMCU–02/03
0 1 2 3 4 5
4
Cap. val. = 4
0 1
2