CV500ETN01 Omron, CV500ETN01 Datasheet - Page 155

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Using FINS Applications
6-5-2
130
FinsGateway
Overview of Setup Methods
2. Save the routing table file (File - Save local routing table file).
3. Select New from the Project Menu, and save with a file name. Then select
4. With CX-Integrator, select Open from the PLC Menu.
5. Select Routing table
FinsGateway Ver. 2003 must be used to communicate using FINS/TCP
between applications serving as communications drivers and CS1W-ETN21
or CJ1W-ETN21 Ethernet Units.
FinsGateway Ver. 3.@ or lower versions can be used, however, when commu-
nicating by the FINS/UDP method only.
1. Starting FinsGateway Settings
Select FinsGateway
2. ETN_UNIT Driver Setup
1. Double-click on ETN_UNIT in the settings for the network and Unit. The fol-
• Local Network Table
• Relay Network Table
• Local Network Table
• Relay Network Table
None
Example: PLC 2 and PLC 3 Routing Table Settings
In order to relay from PLC2/3 to the final network number 1, it is necessary
to relay via node address 1 (i.e., the Controller Link Unit) on relay network
number 2.
Add Device from the Project Menu. For each PLC, register a PLC with a
direct serial connection (node address: 0), and select it.
Transfer to PLC. Click Yes to transfer the routing tables to the connected
PLCs.
lowing ETN_UNIT Properties Window will be displayed.
0
1
0
1
Final network number
Unit number
Unit number
FinsGateway Setup to start the FinsGateway Setup.
1
2
2
Local network number
Local network number
Setup, read the saved file, and select Options
2
Relay network number
1
Relay node address
Section 6-5