CV500ETN01 Omron, CV500ETN01 Datasheet - Page 64

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2-6
2-6-1
2-6-2
Applicable Programming
Devices
Creating I/O Tables
Creating I/O Tables
I/O Table Overview
Connecting Programming Devices to the PLC
1,2,3...
1. Lay the twisted-pair cable.
2. Connect the cable to the hub. Be sure to press in the cable until it locks into
3. Connect the cable to the connector on the Ethernet Unit. Be sure to press
I/O tables are used to identify Units mounted to the PLC, and to allocate I/O to
them. With CS-series and CJ-series PLCs, whenever there is a change to the
Unit configuration it is necessary to create I/O tables and register the Units to
the CPU Unit.
The I/O tables can be created in the following ways.
To create the I/O tables, connect a Programming Device (such as a CX-Pro-
grammer or Programming Console) to the PLC.
The following Programming Devices can be used with CS/CJ-series PLCs.
• Using the CX-Programmer offline.
• Using the CX-Programmer online, with the Units mounted to the PLC.
• Using the Programming Console, with the Units mounted to the PLC.
• Using the CPU Unit's automatic I/O allocation at startup. (This method is
place.
Request cable installation from a qualified professional.
in the cable until it locks into place.
available for the CJ Series only.)
From here on, operations involving the Programming Console are
described.
Example: CS1W-ETN21
Ethernet Unit
RJ45 Modular Connector
Section 2-6
39