CV500ETN01 Omron, CV500ETN01 Datasheet - Page 222

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Response Codes
7-3-29 IP ADDRESS READ
Command Block
Response Block
Parameters
Command/Response Reference
FINS Node Address
Node address set on the Ethernet Unit (hexadecimal).
IP Address
IP address set on the Ethernet Unit (hexadecimal).
Reads the local IP address and subnet mask in the CPU Bus Unit System
Setup and the FINS node address. The values read with this command, how-
ever, are not necessarily the settings actually used for operation. The settings
that are actually used for operation can be confirmed using CONTROLLER
DATA READ (page 160) and ADDRESS INFORMATION READ (page 196).
This command is supported for CJ-series Ethernet Units only.
Number of Addresses (Response)
The number of sets of FINS node addresses, IP addresses, and subnet
masks being returned. The Ethernet Unit is always 0001 (1 decimal).
FINS Node Address (Response)
Node address set on the Ethernet Unit (hexadecimal).
IP Address (Response)
The local IP address set in the CPU Bus Unit System Setup for the Ethernet
Unit is returned in order starting from the leftmost bytes in hexadecimal. If the
local IP address set in the allocated words in the DM Area is enabled, 0.0.0.0
is returned.
0000
1001
Command
Command
27 67
27 67
Response code
code
code
Response
code
Number of
addresses
Normal
Command too large
00
FINS node
1
number
FINS
node number
00
IP address
IP address
Description
6 bytes
Subnet mask
Section 7-3
197