SAA-XC866-2FRA 5V BE Infineon Technologies, SAA-XC866-2FRA 5V BE Datasheet - Page 45

• Manufacturer Part Number: SAA-XC866-2FRA 5V BE
• Description: IC MCU 8BIT FLASH PG-TSSOP-38
• Manufacturer: Infineon Technologies
• Series: XC8xxr

Specifications of SAA-XC866-2FRA 5V BE

• Core Processor: XC800
• Core Size: 8-Bit
• Speed: 86MHz
• Connectivity: SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 27
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 140°C
• Package / Case: 38-TFSOP (0.173", 4.40mm Width)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: MCBXC866 - BOARD EVAL FOR INFINEON XC86X
• Other names: AX8662FRABEXT; SAA-XC866-2FRA BE; SAA-XC866-2FRA5VBEINTR; SAA-XC866-2FRABEINTR; SAA-XC866-2FRABEINTR; SP000281789

3.3.1
The SAA-XC866 product family offers four Flash devices with either 8 Kbytes or
16 Kbytes of embedded Flash memory. These Flash memory sizes are made up of two
or four 4-Kbyte Flash banks, respectively. Each Flash device consists of Program Flash
(P-Flash) bank(s) and a single Data Flash (D-Flash) bank with different sectorization
shown in
neither implies that the D-Flash is mapped to the data memory region, nor that it can only
be used for data storage. It is used to distinguish the different Flash bank sectorizations.
Figure 11
The internal structure of each Flash bank represents a sector architecture for flexible
erase capability. The minimum erase width is always a complete sector, and sectors can
be erased separately or in parallel. Contrary to standard EPROMs, erased Flash
memory cells contain 0s.
The D-Flash bank is divided into more physical sectors for extended erasing and
reprogramming capability; even numbers for each sector size are provided to allow
greater flexibility and the ability to adapt to a wide range of application requirements.
Data Sheet
Figure
Flash Bank Sectorization
Flash Bank Sectorization
Sector 0: 3.75-Kbyte
11. Both types can be used for code and data storage. The label “Data”
Sector 2: 128-byte
Sector 1: 128-byte
P-Flash
42
Sector 3: 512-byte
Sector 9: 128-byte
Sector 8: 128-byte
Sector 7: 128-byte
Sector 6: 128-byte
Sector 5: 256-byte
Sector 4: 256-byte
Sector 2: 512-byte
Sector 1: 1-Kbyte
Sector 0: 1-Kbyte
D-Flash
Functional Description
SAA-XC866
V1.5, 2010-09