SAA-XC866-2FRA 5V BE Infineon Technologies, SAA-XC866-2FRA 5V BE Datasheet - Page 82

• Manufacturer Part Number: SAA-XC866-2FRA 5V BE
• Description: IC MCU 8BIT FLASH PG-TSSOP-38
• Manufacturer: Infineon Technologies
• Series: XC8xxr

Specifications of SAA-XC866-2FRA 5V BE

• Core Processor: XC800
• Core Size: 8-Bit
• Speed: 86MHz
• Connectivity: SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 27
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 140°C
• Package / Case: 38-TFSOP (0.173", 4.40mm Width)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: MCBXC866 - BOARD EVAL FOR INFINEON XC86X
• Other names: AX8662FRABEXT; SAA-XC866-2FRA BE; SAA-XC866-2FRA5VBEINTR; SAA-XC866-2FRABEINTR; SAA-XC866-2FRABEINTR; SP000281789

3.16
Timer 2 is a 16-bit general purpose timer (THL2) that has two modes of operation, a
16-bit auto-reload mode and a 16-bit one channel capture mode. If the prescalar is
disabled, Timer 2 counts with an input clock of PCLK/12. Timer 2 continues counting as
long as it is enabled.
Table 29
Mode
Auto-reload Up/Down Count Disabled
Channel
capture
Data Sheet
Timer 2
Timer 2 Modes
Description
• Count up only
• Start counting from 16-bit reload value, overflow at FFFF
• Reload event configurable for trigger by overflow condition only, or by
• Programmble reload value in register RC2
• Interrupt is generated with reload event
Up/Down Count Enabled
• Count up or down, direction determined by level at input pin T2EX
• No interrupt is generated
• Count up
• Count down
• Count up only
• Start counting from 0000
• Reload event triggered by overflow condition
• Reload value fixed at 0000
• Capture event triggered by falling/rising edge at pin T2EX
• Captured timer value stored in register RC2
• Interrupt is generated with reload or capture event
negative/positive edge at input pin T2EX as well
– Start counting from 16-bit reload value, overflow at FFFF
– Reload event triggered by overflow condition
– Programmble reload value in register RC2
– Start counting from FFFF
– Reload event triggered by underflow condition
– Reload value fixed at FFFF
RC2
H
79
, overflow at FFFF
H
H
, underflow at value defined in register
H
H
Functional Description
SAA-XC866
H
V1.5, 2010-09
H