SC16C850IBS,157 NXP Semiconductors, SC16C850IBS,157 Datasheet - Page 11

• Manufacturer Part Number: SC16C850IBS,157
• Description: IC UART SGL W/FIFO 32HVQFN
• Manufacturer: NXP Semiconductors

Specifications of SC16C850IBS,157

• Features: Programmable
• Number Of Channels: 1, UART
• Fifo's: 128 Byte
• Protocol: RS485
• Voltage - Supply: 2.5 V ~ 3.3 V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 32-VFQFN Exposed Pad
• Transmitter And Receiver Fifo Counter: Yes
• Data Rate: 5Mbps
• Mounting: Surface Mount
• Pin Count: 32
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
SC16C850
Product data sheet
6.4.1 32-byte FIFO mode
6.4.2 128-byte FIFO mode
6.4 FIFO operation
Table 5.
[1]
[2]
[3]
[4]
[5]
[6]
When all four of these registers (TXINTLVL, RXINTLVL, FLWCNTH, FLWCNTL) in the
‘first extra feature register set’ are empty (0x00) the transmit and receive trigger levels are
set by FCR[7:4]. In this mode the transmit and receive trigger levels are backward
compatible to the SC16C650B (see
transmit and receive data FIFOs are enabled by the FIFO Control Register bit 0 (FCR[0]).
It should be noted that the user can set the transmit trigger levels by writing to the FCR,
but activation will not take place until EFR[4] is set to a logic 1. The receiver FIFO section
includes a time-out function to ensure data is delivered to the external CPU (see
Section
Table 6.
When either TXINTLVL, RXINTLVL, FLWCNTH or FLWCNTL in the ‘first extra feature
register set’ contains any value other than 0x00, the transmit and receive trigger levels are
set by TXINTLVL and RXINTLVL registers. TXINTLVL sets the trigger levels for the
transmit FIFO, and the transmit trigger levels can be set to any value between 1 and 128
with granularity of 1. RXINTLVL sets the trigger levels for the receive FIFO, the receive
trigger levels can be set to any value between 1 and 128 with granularity of 1.
When the effective FIFO size changes (that is, when FCR[0] toggles or when the
combined content of TXINTLVL, RXINTLVL, FLWCNTH and FLWCNTL changes between
equal and unequal to 0x00), both RX FIFO and TX FIFO will be reset (data in the FIFO will
be lost).
A2
Second extra feature register set (CLKPRES, RS485TIME, AFCR2, AFCR1)
0
1
1
1
FCR[7:6]
00
01
10
11
These registers are accessible only when LCR[7] is a logic 0.
These registers are accessible only when LCR[7] is a logic 1.
Second Special registers are accessible only when EFCR[0] = 1.
Enhanced Feature Registers are only accessible when LCR = 0xBF.
First Extra Feature Registers are only accessible when EFCR[2:1] = 01b.
Second Extra Feature Registers are only accessible when EFCR[2:1] = 10b.
A1
1
0
1
1
6.8). Please refer to
Internal registers decoding
Interrupt trigger level and flow control mechanism
A0
0
0
0
1
FCR[5:4]
00
01
10
11
All information provided in this document is subject to legal disclaimers.
Read mode
Clock Prescaler
RS-485 turn-around Timer
Additional Feature Control Register 2
Additional Feature Control Register 1
2.5 to 3.3 V UART with 128-byte FIFOs and IrDA encoder/decoder
Rev. 2 — 11 November 2010
INT pin activation
RX
8
16
24
28
Table 11
TX
16
8
24
30
Table
…continued
and
6), and the FIFO sizes are 32 entries. The
Table 12
Negate RTS or
send Xoff
8
16
24
28
for the setting of FCR[7:4].
Write mode
Additional Feature Control Register 2
Additional Feature Control Register 1
Clock Prescaler
RS-485 turn-around Timer
SC16C850
Assert RTS or
send Xon
0
7
15
23
© NXP B.V. 2010. All rights reserved.
[6]
11 of 55