SAM9XE512 Atmel Corporation, SAM9XE512 Datasheet - Page 16

• Manufacturer Part Number: SAM9XE512
• Manufacturer: Atmel Corporation

Specifications of SAM9XE512

• Flash (kbytes): 512 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 180 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 2
• Uart: 6
• Ssc: 1
• Ethernet: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: Yes
• Adc Channels: 4
• Adc Resolution (bits): 10
• Adc Speed (ksps): 312
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 32
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.65 to 1.95
• Fpu: No
• Mpu / Mmu: No / Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

7. Processor and Architecture
7.1
16
ARM926EJ-S Processor
AT91SAM9XE128/256/512 Preliminary
1 MΩ. The resisitor value is calculated according to the regulator enable implementation and the
SHDN level.
The WKUP pin is an input-only. It can accept voltages only between 0V and VDDBU.
• RISC Processor Based on ARM v5TEJ Architecture with Jazelle technology for Java
• Two Instruction Sets
• DSP Instruction Extensions
• 5-Stage Pipeline Architecture:
• 8 Kbytes Data Cache, 16 Kbytes Instruction Cache
• Write Buffer
• Standard ARM v4 and v5 Memory Management Unit (MMU)
• Bus Interface Unit (BIU)
acceleration
– ARM High-performance 32-bit Instruction Set
– Thumb High Code Density 16-bit Instruction Set
– Instruction Fetch (F)
– Instruction Decode (D)
– Execute (E)
– Data Memory (M)
– Register Write (W)
– Virtually-addressed 4-way Associative Cache
– Eight words per line
– Write-through and Write-back Operation
– Pseudo-random or Round-robin Replacement
– Main Write Buffer with 16-word Data Buffer and 4-address Buffer
– DCache Write-back Buffer with 8-word Entries and a Single Address Entry
– Software Control Drain
– Access Permission for Sections
– Access Permission for large pages and small pages can be specified separately for
– 16 embedded domains
– Arbitrates and Schedules AHB Requests
– Separate Masters for both instruction and data access providing complete Matrix
– Separate Address and Data Buses for both the 32-bit instruction interface and the
– On Address and Data Buses, data can be 8-bit (Bytes), 16-bit (Half-words) or 32-bit
each quarter of the page
system flexibility
32-bit data interface
(Words)
6254C–ATARM–22-Jan-10