LMH0031VS/NOPB National Semiconductor, LMH0031VS/NOPB Datasheet - Page 8

• Manufacturer Part Number: LMH0031VS/NOPB
• Description: IC DESER/DESCRAM DGTL VID 64TQFP
• Manufacturer: National Semiconductor
• Type: Descrambler/Deserializerr

Specifications of LMH0031VS/NOPB

• Applications: SDTV/HDTV
• Mounting Type: Surface Mount
• Package / Case: 64-TQFP, 64-VQFP
• Input Voltage: 3.3 V
• Supply Voltage (max): 3.45 V
• Supply Voltage (min): 3.15 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• For Use With: SD131EVK - BOARD EVALUATION LMH0031
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *LMH0031VS; *LMH0031VS/NOPB; LMH0031VS

AC Electrical Characteristics
(Continued)
Note 2: Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are referenced to V
= V
=
SSIO
SSD
V
= 0V.
SSSI
Note 3: Typical values are stated for V
= V
= +3.3V, V
= V
= +2.5V and T
= +25˚C.
DDIO
DDSI
DDD
DDPLL
A
Note 4: Spec. is guaranteed by design.
Note 5: Measured from rising-edge of first SDI cycle until Lock Detect bit goes high (true). Lock time includes CDR phase acquisition time plus PLL lock time.
Note 6: V
and V
are measured with respect to reference ground. V
is the peak output LOW voltage or ground bounce that may occur under dynamic
OHV
OLP
OLP
simultaneous output switching conditions. V
is the lowest output HIGH voltage or output droop that may occur under dynamic simultaneous output switching
OHV
conditions.
Note 7: When used to clock control data into or from the LMH0031, the duty cycle restriction does not apply.
Note 8: I
includes static current required by input pull-down devices.
IH
Note 9: Required Input Conditions are the electrical signal conditions or component values which shall be supplied by the circuit in which this device is used in order
for it to produce the specified DC and AC electrical output characteristics.
Note 10: Functional and certain other parametric tests utilize a LMH0030 as the input source to the SDI inputs of the LMH0031. The LMH0030 is DC coupled to
the inputs of the LMH0031. Typical V
= 800 mV, V
= 2.9 V.
IN
CM
Test Loads
20179604
www.national.com
8