XA-G39 NXP Semiconductors, XA-G39 Datasheet - Page 2

no-image

XA-G39

Manufacturer Part Number
XA-G39
Description
Xa 16-bit Microcontroller Family Xa 16-bit Microcontroller 32k Flash/1k Ram, Watchdog, 2 Uarts
Manufacturer
NXP Semiconductors
Datasheet
Philips Semiconductors
GENERAL DESCRIPTION
The XA-G39 is a member of Philips’ 80C51 XA (eXtended
Architecture) family of high performance 16-bit single-chip
microcontrollers.
The XA-G39 contains 32 kbytes of Flash program memory, and
provides three general purpose timers/counters, a watchdog timer,
dual UARTs, and four general purpose I/O ports with programmable
output configurations.
A default serial loader program in the Boot ROM allows In-System
Programming (ISP) of the Flash memory without the need for a
loader in the Flash code. User programs may erase and reprogram
the Flash memory at will through the use of standard routines
contained in the Boot ROM (In-Application Programming).
FEATURES
BLOCK DIAGRAM
2002 Mar 13
32 kbytes of on-chip Flash program memory with In-System
Programming capability
Three Flash blocks = two 8 kbyte blocks and one 16 kbyte block
Provides Flash solution for XA-G37 (OTP) designs
Single supply voltage In-System Programming (ISP) of the Flash
memory (V
XA 16-bit microcontroller family
32K Flash/1K RAM, watchdog, 2 UARTs
PP
= V
DD
, or V
PP
= 12 V if desired)
STATIC RAM
1024 BYTES
32 KBYTES
PORT 0
PORT 1
PORT 2
PORT 3
FLASH
Program
Memory
Bus
XA CPU Core
Data
Bus
2
SFR
bus
Boot ROM contains low level Flash programming routines for
In-Application Programming and a default serial loader using the
UART
1024 bytes of on-chip data RAM
Supports off-chip program and data addressing up to 1 megabyte
(20 address lines)
Three standard counter/timers with enhanced features (same as
XA-G3 T0, T1, and T2). All timers have a toggle output capability
Watchdog timer
Two enhanced UARTs with independent baud rates
Seven software interrupts
Four 8-bit I/O ports, with 4 programmable output configurations for
each pin
30 MHz operating frequency at 5 V
Power saving operating modes: Idle and Power-Down.
Wake-Up from power-down via an external interrupt is supported.
44-pin PLCC package
WATCHDOG
TIMER 0, 1
TIMER 2
UART 0
UART 1
TIMER
SU01594
Preliminary data
XA-G39

Related parts for XA-G39