ACS8514 Semtech Corporation, ACS8514 Datasheet - Page 35

• Manufacturer Part Number: ACS8514
• Description: Synchronous Equipment Timing Source Partner IC for 2nd T4 Dpll, Accurate Monitoring & Input Extender
• Manufacturer: Semtech Corporation

Revision 3.00 April 2007 © Semtech Corp.
Address(hex):
Address(hex): 07
Address(hex): 08
Register Name
Register Name
ADVANCED COMMS & SENSING
Bit No.
Bit No.
Bit No.
Bit 7
[7:3]
[2:0]
Bit 7
7, 5
1
0
6
4
3
Description
I10
Interrupt indicating that input I10 has become valid
(if it was invalid), or invalid (if it was valid). Latched
until reset by software writing a 1 to this bit.
I9
Interrupt indicating that input I9 has become valid (if
it was invalid), or invalid (if it was valid). Latched
until reset by software writing a 1 to this bit.
sts_current_DPLL_frequency
[18:16]
Description
Not used.
sts_current_DPLL_frequency[18:16]
When bit 4 of register 4B = 0 the frequency for the
monitor path is reported.
When this Bit 4 = 1 the frequency for the T4 path is
reported.
sts_interrupts
T4_status
Description
Not used
T4_status
Interrupt indicating that the T4 DPLL has lost lock (if
it was locked) or gained lock (if it was not locked).
Latched until reset by software writing a 1 to this bit.
T4_inputs_failed
Interrupt indicating that no valid inputs are available
to the T4 DPLL. Latched until reset by software
writing a 1 to this bit.
AMI2_Viol
Interrupt indicating that an AMI Violation error has
occurred on input I2. Latched until reset by software
writing a 1 to this bit.
06
Bit 6
Bit 6
(continued)
Bit 5
Bit 5
Description
Description
T4_inputs_
failed
Bit 4
Bit 4
Page 35
FINAL
(RO) Bits [18:16] of the current
DPLL frequency.
(R/W) Bits [23:16] of the
interrupt status register.
AMI2_Viol
Bit Value
Bit Value
Bit Value
Bit 3
Bit 3
0
1
0
1
0
1
0
1
0
1
-
-
-
Value Description
Input I10 has not changed status (valid/invalid).
Input I10 has changed status (valid/invalid).
Writing 1 resets the input to 0.
Input I9 has not changed status (valid/invalid).
Input I9 has changed status (valid/invalid).
Writing 1 resets the input to 0.
Value Description
-
See register description of
sts_current_DPLL_frequency. at address 0D hex.
AMI2_LOS
Value Description
-
Input to the T4 DPLL has not changed.
Input to the T4 DPLL has lost/gained lock.
Writing 1 resets the input to 0.
T4 DPLL has valid inputs.
T4 DPLL has no valid inputs.
Writing 1 resets the input to 0.
Input I2 has had no violation error.
Input I2 has had a violation error.
Writing 1 resets the input to 0.
ACS8514 SETS Buddy
Bit 2
Bit 2
sts_current_DPLL_frequency[18:16]
Default Value
Default Value
AMI1_Viol
Bit 1
Bit 1
DATASHEET
www.semtech.com
0000 0000
0101 0000
AMI1_LOS
Bit 0
Bit 0