BSS316NH6327XT Infineon Technologies, BSS316NH6327XT Datasheet - Page 9

• Manufacturer Part Number: BSS316NH6327XT
• Description: MOSFET OptiMOS 2 Small Signal Transistor
• Manufacturer: Infineon Technologies

Specifications of BSS316NH6327XT

• Rohs: yes
• Transistor Polarity: N-Channel
• Drain-source Breakdown Voltage: 30 V
• Gate-source Breakdown Voltage: +/- 20 V
• Continuous Drain Current: 1.4 A
• Resistance Drain-source Rds (on): 160 mOhms at 10 V
• Configuration: Single
• Maximum Operating Temperature: + 150 C
• Mounting Style: SMD/SMT
• Package / Case: PG-SOT-23
• Fall Time: 1 ns
• Gate Charge Qg: 0.6 nC
• Minimum Operating Temperature: - 55 C
• Power Dissipation: 500 mW
• Rise Time: 2.3 ns
• Typical Turn-off Delay Time: 5.8 ns
• Part # Aliases: BSS316N BSS316NH6327XTSA1 H6327

BSS316N
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2008 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of
conditions or characteristics. With respect to any examples or hints given herein, any typical
values stated herein and/or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please
contact the nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information
on the types in question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with
the express written approval of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support device or system or to affect
the safety or effectiveness of that device or system. Life support devices or systems are
intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user
or other persons may be endangered.
Rev 2.3
page 9
2011-07-06