M68ICS05KJ Freescale Semiconductor, M68ICS05KJ Datasheet - Page 123

• Manufacturer Part Number: M68ICS05KJ
• Description: SIM PROGRAM FOR 68HC705KJ/J1A
• Manufacturer: Freescale Semiconductor
• Type: Simulator/Programmerr

Specifications of M68ICS05KJ

• Contents: Programmer, Power Supply, Assembler/Simulator/Debugger, Cable, Software and Documentation
• For Use With/related Products: 68HC705KJ/JIA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M68ICS05KJOM/D
POD
PORTA
PORTB
PROGRAM
PRTA
PRTB
QUIT
R
REG
REM
RESET
RESETGO
RUN
SAVEDESK
SCRIPT
SHOW
Command
Table 7-2. ICS05KJW Command Overview (continued)
Attempt to connect with the ICS05KJW circuit board through the specified
COM port; when successful, the POD command returns the current status of
ports, reset and IRQ pins on the ICS05KJW board and the board version
number.
Assign the specified value to the Port A output register latches. (Identical to
the PRTA command.)
Assign the specified value to the Port B output register latches. (Identical to
the PRTB command.)
Start the programmer for the desired device.
Assign the specified value to the Port A output register latches. (Identical to
the PORTA command.)
Assign the specified value to the Port B output register latches. (Identical to
the PORTB command.)
Terminate the ICS05KJW application and close all windows. (Identical to the
EXIT command.)
Open window for Register files (available separately from P&E
Microcomputer Systems) and starts interactive setup of system registers
such as I/O, time, COP.
Display contents of CPU registers in the Status Window. (Identical to the
STATUS command.)
Enter comments in a macro file.
Simulate a reset of the MCU and sets the PC to the contents of the reset
vector. Does not start execution of user code.
Simulates a reset of the MCU, sets PC to contents of the reset vector, and
starts execution from the PC address.
Start execution of code at the current PC current or specified address.
(Identical to the G or GO command.)
Save the desktop settings for the ICS05KJW program when it is first opened
or for use with the LOADDESK command.
Execute a macro file containing debug command sequences. (Identical to the
MACRO command.)
Display the contents of memory locations in the Memory Window beginning
at the specified address. (Identical to the MD command.)
Description
DEBUGGING COMMAND SET
7-7