M68ICS05KJ Freescale Semiconductor, M68ICS05KJ Datasheet - Page 183

• Manufacturer Part Number: M68ICS05KJ
• Description: SIM PROGRAM FOR 68HC705KJ/J1A
• Manufacturer: Freescale Semiconductor
• Type: Simulator/Programmerr

Specifications of M68ICS05KJ

• Contents: Programmer, Power Supply, Assembler/Simulator/Debugger, Cable, Software and Documentation
• For Use With/related Products: 68HC705KJ/JIA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

DEBUGGING COMMAND SET
PROGRAM
Start Programmer
The PROGRAM command starts the programmer. The programmer is used for such procedures
as programming, verifying, blank-checking the sample EPROM, and programming the MOR
byte for the desired device.
Programming software installed on the host computer can control the M68ICS05KJ pod
programming socket. The host computer can send RESET, CLOCK, DATA, and other control
signals to the pod through the serial connection.
After entering the PROGRAM command and before beginning to program the EPROM, follow
the directions in the popup windows for setting the power switches and control signals. After
these have been set, the Pick window displays the command choices summarized in Table 7-3.
During programming, you may use the following programming windows:
Pick Window
The Pick Window (Figure 7-4) displays all programming actions and functions.
Figure 7-4. Programmer Pick Window
Status Window
The Programmer Status Window accepts programming commands on the command line or from
the Pick Window, then displays the command results in the message area. It is identical in form
and function to the ICS05KJW Status Window.
M68ICS05KJOM/D
7-67