DSPIC33FJ16GS504-I/PT Microchip Technology, DSPIC33FJ16GS504-I/PT Datasheet - Page 215

• Manufacturer Part Number: DSPIC33FJ16GS504-I/PT
• Description: IC DSPIC MCU/DSP 16K 44-TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16GS504-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 16KB (16K x 8)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 35
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Data Ram Size: 2 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 15-15: FCLCONx: PWMx FAULT CURRENT-LIMIT CONTROL REGISTER (CONTINUED)
© 2009 Microchip Technology Inc.
bit 7-3
bit 2
bit 1-0
Note 1: These bits should be changed only when PTEN = 0. Changing the clock selection during operation will
2: When Independent Fault mode is enabled (IFLTMOD = 1), and Fault 1 is used for Current-Limit mode
3: When Independent Fault mode is enabled (IFLTMOD = 1) and Fault 1 is used for Fault mode
yield unpredictable results.
(CLSRC<4:0> = b0000), the Fault Control Source Select bits (FLTSRC<4:0>) should be set to an unused
Fault source to prevent Fault 1 from disabling both the PWMxL and PWMxH outputs.
(FLTSRC<4:0> = b0000), the Current-Limit Control Source Select bits (CLSRC<4:0>) should be set to an
unused current-limit source to prevent the current-limit source from disabling both the PWMxH and
PWMxL outputs.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FLTSRC<4:0>: Fault Control Signal Source Select for PWM Generator # bits
00000 = Fault 1
00001 = Fault 2
00010 = Fault 3
00011 = Fault 4
00100 = Fault 5
00101 = Fault 6
00110 = Fault 7
00111 = Fault 8
01000 = Reserved
•
•
•
11111 = Reserved
FLTPOL: Fault Polarity for PWM Generator # bit
1 = The selected Fault source is active-low
0 = The selected Fault source is active-high
FLTMOD<1:0>: Fault Mode for PWM Generator # bits
00 = The selected Fault source forces PWMxH, PWMxL pins to FLTDAT values (latched condition)
01 = The selected Fault source forces PWMxH, PWMxL pins to FLTDAT values (cycle)
10 = Reserved
11 = Fault input is disabled
Preliminary
(1)
(2,3)
DS70318D-page 213