DSPIC33FJ16GS504-I/PT Microchip Technology, DSPIC33FJ16GS504-I/PT Datasheet - Page 253

• Manufacturer Part Number: DSPIC33FJ16GS504-I/PT
• Description: IC DSPIC MCU/DSP 16K 44-TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16GS504-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 16KB (16K x 8)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 35
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Data Ram Size: 2 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 19-6:
© 2009 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
IRQEN3
IRQEN2
Note 1: These bits are available in the dsPIC33FJ16GS402/404, dsPIC33FJ16GS504, dsPIC33FJ16GS502 and
R/W-0
R/W-0
2: These bits are available in the dsPIC33FJ16GS502, dsPIC33FJ16GS504, dsPIC33FJ06GS102,
3: If other conversions are in progress, then conversion will be performed when the conversion resources are
(1)
(2)
dsPIC33FJ06GS101 devices only.
dsPIC33FJ06GS202 and dsPIC33FJ16GS402/404 devices only.
available.
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
IRQEN3: Interrupt Request Enable 3 bit
1 = Enable IRQ generation when requested conversion of channels AN7 and AN6 is completed
0 = IRQ is not generated
PEND3: Pending Conversion Status 3 bit
1 = Conversion of channels AN7 and AN6 is pending. Set when selected trigger is asserted
0 = Conversion is complete
SWTRG3: Software Trigger 3 bit
1 = Start conversion of AN7 and AN6 (if selected in TRGSRC bits)
This bit is automatically cleared by hardware when the PEND3 bit is set.
0 = Conversion is not started
PEND3
PEND2
R/W-0
R/W-0
ADCPC1: A/D CONVERT PAIR CONTROL REGISTER 1
(1)
(2)
W = Writable bit
‘1’ = Bit is set
SWTRG3
SWTRG2
R/W-0
R/W-0
(1)
(2)
R/W-0
R/W-0
(1)
Preliminary
(1)
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
R/W-0
TRGSRC3<4:0>
TRGSRC2<4:0>
R/W-0
R/W-0
(3)
(1)
(2)
x = Bit is unknown
R/W-0
R/W-0
DS70318D-page 251
R/W-0
R/W-0
bit 8
bit 0